Specification for LED shoulder Light  It must provide blinking lights in two colours red and blue.----YES 

The device should not weigh more than 75 grams.----YES

The device weight is only 40 grams

The device should be designed so that it is easy to put on the shoulder strap of the uniform and remain and secure.----YES

The device should be visible over 200 m in No Light Conditions.----YES 

The device should have a light intensity >7000 mcd. ----YES 

Size should not exceed 80 mm (L) x 40 mm (W) x 25 mm (H).----YES

Our size is 80 mm (L) x 33 mm (W) x 26 mm (H) 

The device must be provided with a 220V AC adapter for charging.----YES 

The device should be IP 67 certified. It will test this by submerging the device in water for 10 minutes.

The device must continuously work during this period and continue to work after submersion.----YES

  The device should be rugged – Should not break if dropped from 1.5 m.----YES

The batteries should be able withstand a minimum 1,500 charging cycles.----YES

  The device must run for at least 8 hours on a single charge on high power mode with all LEDs ON.----YES 

Operating temperature -5°C to 60°C.----YES 

Device should meet flammability rating needs of UL94, UL746B.----NO

  The device must have the provision to be charged from a vehicle.

Supplier must be capable of providing kits for vehicle recharging.----YES

Specification for LED shoulder Light  It must provide blinking lights in two colours red and blue.----YES  The device should not weigh more than 75 grams.----YES, the device weight is only 40 grams The device should be designed so that it is easy to put on the shoulder strap of the uniform and remain and secure.----YES The device should be visible over 200 m in No Light Conditions.----YES   The device should have a light intensity >7000 mcd. ----YES Led Shoulder Traffic Lights